Sensors
- Supply voltage 5 volts
- Current consumption: approx. 15 mA
- Measurement interval: about 20 ms
- Range approx. 2 cm - 3 m
- Opening angle: approx. 15 °
- Resolution: approx. 0.3 cm
- Size: approx. 45 mm x 20 mm x 15 mm
Coils for the loop receiver.
150mH
Need the new sound sensor with 200 x amplification.
Sound sensor with 200 x amplification, suitable for amplifying the perimeter signal.
With this board, currents up to 20A can be measured. Using the Hall Efect principle.
With the Ardumower, for example, the current of the drive motors and the charge of the battery can be monitored.
With the Ardumower, for example, the current of the drive motors and the charge of the battery can be monitored.
With this board, currents up to 5A can be measured. Using the Hall Efect principle.
With the Ardumower, for example, the current of the drive motors and the charge of the battery can be monitored.